Rain Test

The battery meter I had ordered was defective.  I ordered a new one and it arrived today.  So, I decided that I would test it out.  It worked perfectly, so I decided to go ahead and install it.

Just as I started screwing it into its place, the sky unleashed with a torrential downpour.  Once again I was reminded of the genius of the teardrop design; I was completely dry as the rain fell hard all around me.  

As the rain continued to fall, it seemed to come sideways for a few minutes.  Rain splashed the countertop  and the doors.  Luckily for me, the polyurethane did its job!  Minutes before the rain had come, I had lightly sanded the surface.  I'll add another coat or two to all of the surfaces this weekend.  It's nice to see something working the way it is supposed to!

One thing I am unsure of is the health of my battery.  I have only had it for about a year.  I purchased it last spring to use on our canoe with a trolling motor.  I kept it on a battery tender over the winter.  I noticed that the red light stayed on continually a lot during the winter.  Turns out, it might not be okay.  As the image shows, the maximum voltage I can get on it is 11.8 volts.  I'm not sure what to do about it.  I've posted a question on the TTNT website and look forward to the insight of those on the board.

The gasket over the hinge is working perfectly.  I had adjusted the end pieces so that the water would run off the edge.  So far, no problems with the gasket at all.

We have a little moisture coming in through the carriage bolts near the lock.  I am going to use rubber washers to hopefully keep the water out.

I want to use rubber washers on the bolts for the tail lights too.  Additionally, I'll caulk around the top of the lights to keep the water from penetrating under the plastic and entering the hatch.

It's a little hard to tell from this image, but I kept the vent slightly ajar today.  It was another hot day.  The temperature inside rose to over 100 degrees again; outside it was 90+ degrees.  I think the real test will be when I'm able to keep the window screens open too.  

Another item arrived in the mail today; the teardrop's mattress.  We ended up finding a nearly perfect mattress at Wal Mart.  We weren't too sure about it, but after opening the box and letting it expand, we are positive that this will be phenomenal!  It's exactly the right width: 58".  We'll need to trim the feet portion of it to fit the teardrop's bed area, but that should be fairly simple with an electric knife.  The whole family gave it a once over and we really like it.  I'm a side sleeper so I knew that I would need something that would support me; this mattress is perfect.  Throw in a couple of body pillows and we are in sleep heaven!

Tomorrow I'm taking a half day.  I can't wait to get home and get to work.  My first job will be to re-test the trailer wiring.  I'm planning to solder all the connections and test each and every one of them.  My main goal for the weekend is to get the insulation installed and possibly the headliner in place.  It's ambitious, but I'm optimistic.

I found out today that I'm going to have surgery on my left wrist early this summer.  I had the same surgery on my right hand a couple of years ago for carpal tunnel.  Ideally I would like to have the teardrop 'done' enough to camp in it by the time I have that surgery.  I'll have my work cut out for me for sure!

Black Freckles and Electrical Frustration

Yesterday was a pretty good day.  I was able to spray the undercoating to the bottom of trailer.  That was quite messy, but I'm glad that I got it applied.  Jacked up the Carpe Diem to make it easier to work under it.  I'm loving my 3 ton jack stands from Harbor Freight!

 

I ended up using two cans of the cheap stuff; one can of the expensive stuff.  Then I found a third kind of undercoating at Lowes.  It was about half the price between the cheap and the expensive stuff.  I used four cans of it.  Purchased one of the inexpensive 'spray triggers.'  That made the whole process a lot easier.

 

I was really happy to have the glasses and mask on.  However, I ended up with some serious over spray on my face.  Took a long time to clean those glasses too!

I've given up on the idea of having four LED lights the teardrop.  My plan was for them to be on each corner of the teardrop and that they would go on when I turned on the porch lights.  The LED's had teeny tiny wires and I think somehow there must have been a bad connection in one of the many connections.  I spent a couple of days pulling wires again.  I had originally used some wire that I had on hand.  It was way too thick and made it close to impossible to join with three or four pieces like I had to.  I used automotive wire and waterproof connections, but I could not get them to work properly.  I couldn't get them to work and after spending so much time on it, I just clipped the wires and moved on.  No LED's on the corners. 

I had some real problems today too with the switch I planned to use for the porch lights.  I am not sure if I've messed something up with it or if the switch is bad.  Each time I connect the switch, the fuse blows.  I'm going to have to research that a bit.

I am anxious to get the inside insulated, but I'm going to slow down and focus on the electrical; it's not only the part of the project that makes me the most anxious; it's probably the most important part.  I won't be able to easily work on it once i cover the inside with insulation and carpet.

Lastly, I trimmed the cooler tray so that I could easily use the two 12 volt outlets.  I had made the cooler tray an inch too tall and it impeded the entry of the second 12 volt outlet.

 The battery meter is still not functioning properly.  I may have to purchase a new meter if I can't figure out what's going on with the one I have presently.

Now its time to do a little research on trailer wiring and how to fix the switch.

I ended the day with touching up all the paint and tidying up the wires a bit.  Tomorrow I hope to complete the trailer wiring and figure out the switch.  If I can get those two things done, I will install the Marinco power inlet 120 volt system.

On a side note, my wife crawled into the teardrop for the first time yesterday.  She was pretty psyched.  She's been investigating the body pillows and the mattress situation for me.  We planned to use our futon mattress, but we've decided not to do that.  It seems we can find some decent alternatives relatively inexpensively.  We are researching a bit more and we'll see where we come out.  I'm glad she's taking an interest in the project.  I cannot wait for our maiden voyage; whenever that may come!